Fiberglass Double Hung Window
Traditional and elegant style. Regardless of your building style, you can’t go wrong with a classic double hung window. Designed so that both sashes move up and down, you’ll have the maximum cleaning accessibility, and the most versatile ventilation possibilities. Open the top, the bottom, or both sashes to suit your needs.
Series 8000 factory-assembled fiberglass windows with tilt-in opening sash installed in frame. 3 1/4″ Pultruded Fiberglass Closed Back Frame completely filled with laser die cut Polystyrene, PBT corner key reinforced Mechanical joint Corners, sealed with silicone sealant and are independently tested to AAMA 101/I.S.2, CSA 101/I.S.2 /A440-05 standards.
The three seal design conforms to the rain screen principle.
- Wool pile and bulb seal weather stripping on sash
- Wool pile weather stripping on frame
Type: Dual insulated Low-E coated with Argon
The glass is held in place by a removable Interior glass stop. Double-sided closed cell foam tape on the frame. The glazing cavity is edge drained to the exterior with concealed drainage holes. The glazing cavity is also edge vented to the exterior through concealed vent holes. The glass stop provides rain screen principal to keep water out.
Choose from our four standard colours for your exterior and interior frames.
Choose from our 15 Premium colours for your exterior and interior frames or select from Sherwin Williams.
Choose from any colour from the Sherwin Williams colour book or bring in your own colour for us to match. Click on the photo to view all the Sherwin Williams colours.
- Steel Single/Dual locks
- Zinc die cast and painted finish
- Exposed Fasteners: Painted
- Hardware Salt Spay Exposure, ASTM B 117: Exceed 1,000 hours
B. Crank Handle Finish
- Cast: Painted
C. Locking System
- Cam Locks
- One or two locking points
- Lock Handle Finish: Painted